Chrysis Construction Caterpillar 583R Pipelayers

Home Page	About Chrysis	What we can offer	Pipelayer Specs	Photogallery	Contact Us

Cat 583R Pipelayer

Transmission	Hydraulic Control	Capacities
Steering	Engine	Weights
Counterweights	Dimensions	Equipment
Undercarriage		Updated: November 20, 2002

Summary of Features

Cat 3406C DITA diesel engine
245 kW/ 328 HP flywheel power
63,504 kg / 140,000 lb. lift capacity
Planetary power shift transmission
Bolt-on sprocket rim segments
Sealed track

Transmission

Three speed planetary auto shift, remotely mounted from engine.

Modular transmission and bevel gear plug into rear of main drive case. Special modulation system permits fast speed and direction changes.

Transmission	Forward Speed		Reverse Speed
Gear	Km/h - MPH		Km/h - MPH
1	3.5	2.3	4.7	2.9
2	6.4	4.0	8.1	5.0
3	10.8	6.8	13.8	8.6

Torque Divider

A single stage torque converter with output torque divider
70% of engine torque through the converter, 30% through a direct drive shaft
Torque divider shields the driveline from sudden torque shocks and vibration

Final Drives

Crown shaved, two-stage planetary, in-line final drive gears
Splash lubricated and sealed with Du-Cone floating ring seals
Sprockets have five bolt-on, replaceable rim segments

Steering

Multiple disc clutches and brakes meet SAEJ1026 at APR90

Hydraulically released, spring applied and separated
Cooled by pressurized oil
No adjustment require
Each assembly serviceable as a unit
Clutch hand controls
Two brake foot pedals
Mechanically actuated, spring applied parking brake

Counterweights

Full hydraulic, single lever control
13 segments, 2@300 kg (662 lb), 6@535 kg (1180 lb) 5@430 kg (948 lb)	5,960 kg	13,144 lb
Total weight extendable	9,036 kg	19,920 lb

Full hydraulic, single lever control. Horizontal pivot point design provides good side and ground clearance.

Undercarriage

Tubular design resists torisional loads.

Lifetime lubricated rollers and idlers are directly mounted to roller frame
Roller frames attach to tractor by pivot shaft and pinned front bar
Large, lubricated pivot bushings require no maintenance
Recoil system fully sealed and lubricated

Number of track rollers (each side)	9
Track guage	2,337 mm	92"
Number of track shoes, each side	47
Length of track on ground	3,587 mm	141"
Ground contact area with 710 mm (28") shoes	5.10 sq m	7,896 sq in

Hydraulic Controls

Three section gear pump

Pump output at 2,100 pump rpm (2,100 engine rpm) and maximum pressure 490 L/min (129 gpm)

Relief valve setting
Counterweight	17,225 kPa	2,500 psi
Hook and boom winch	18,259 kPa	2,650 psi

Caterpillar Engine

Four-stroke cycle, 3406C turbocharged and aftercooled diesel engine.

Ratings at 2100 RPM	kW	HP
Gross power	245	328
Net power	228	305
The following ratings apply at 2100 RPM when tested under the specific standard conditions for the specified standard:
Net power	kW	HP
Caterpillar	228	305
ISO 9249	228	305
EEC 80/1269	228	305
SAE J1349	226	302
DIN 70020		317 PS
Dimensions
Bore	137 mm	5.4 in
Stroke	165 mm	6.5 in
Displacement	14.6 litres	893 cubic in

* Power rating conditions

Based on standard air conditions of 25C (77F) and 99 kPa(29.32 in ) Hg dry barometer
Used 35 degree API gravity fuel having an LHV of 42,780 kJ/kg (18,390 Btu/lb) when used at 30C(86F) [ref. a fuel density of 838.9 g/L (7.001 lb/galUS)]
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler, and alternator
No derating required up to 2286 m (7500 ft) altitude

Features

Direct injection fuel system with individual adjustment-free unit injectors
Cam ground and tapered, aluminum alloy pistons with three keystone designed rings, each cooled by oil spray
Steel backed, copper bonded, aluminum bearings, through hardened crankshaft journals
Pressure lubricated with full-flow filtered and cooled oil
Dry-type air cleaner with primary and secondary elements
24-volt direct-electric starting system, 50-amp alternator
Engine/torque divider module is isolation mounted to the mainframe reducing machine vibration and structure radiated noise
Water cooled turbocharger bearing for longer life

Dimensions



A) Width to outside of track	3048 mm (10'0")
B1) Minimum shipping width (counterweight frame, counterweight mounting brackets, boom and boom mounting brackets removed)	3464 mm (11'4")
B2) Shipping width (boom and counterweight removed)	3644 mm (11'11")
C) SAE ground clearance (face of shoe)	537 mm (21.1")
D) Boom height at SAE 4 ft overhang	6900 mm (22'7")
E) Height to top of retracted counterweight	3410 mm (11'2")
F) Grouser height	78 mm (3.1")
G) Operating length	5486 mm (18')
H) Shipping height (boom removed)	3513 mm (11'6")

Service refill capacities

Service refill capacities	Liters	U.S. Gallons
Fuel tank	416	110
Cooling system	92	24.3
Hydraulic tank	114	30
Transmission, bevel gear & steering clutch (includes torque converter or oil clutch)	190	50
Final drives (each)	13	3.4
Crankcase and filter	32.5	8.6
Recoil spring compartments (each side)	73	19

Lifting capacities

Lifting Capacity 6.10 m / 20' boom

Specified Equipment

Six part load line
19 mm / .75" dia. wire rope 26,672 kg / 58,800 lb minimum breaking strength
5 part boom line
9,036 kg / 19,920 lb of counterweights extended
Total operating weight 44,748 kg / 98,650 lb

A Max lift capacity per SAEJ743 MAR92

B Rated load capacity per ANSI/ASME B30.14

C Working range per ANSI/ASME B30.14

Weights

Weights	Kg	Lbs
Operating	44,748	98,650
Includes all shipping weights plus full fuel tank and operator
Shipping (includes lubricants, coolant, 10% fuel, hydraulic controls and fluids, backup alarm, seat belt, 710 mm (28") single grouser shoes, drawbar and counterweight)	44,347 kg	97,767 LB

Top

Pipelaying equipment

Live power: Continuous power to pipelayer winches, independent of torque converter.

Hydraulic Power: 490 L/min at 18 259 kPa / 183 bar (129 GPM at 2650 PSI) and 2100 rpm pump speed independent of torque converter.


	Hook		Boom
Drum Diameter	343 mm	13.5 in	343 mm	13.5 in
Flange diameter	571 mm	22.5 in	571 mm	22.5 in
Drum length	303 mm	11.9 in	303 mm	11.9 in
Capacity with 19 mm/ .75" load cable	126 m	414 ft	126 m	414 ft

Hook speed (raise)	6-part load line
	Low	High
6-part line	7.5 m/min (24 ft/min)	22 m/min (73 ft/min)

Top Contact List Contact Us

Chrysis Construction Services Inc.
3040 McAnally Road, Victoria, B.C., Canada V8N 1T4
Attn: Geoff Birkbeck
Phone: (250) 477-2142 Fax: (250) 477-2162
email: chrysis@sideboom.com

www.sideboom.com

Developed by Focus Web Designs

This site is best viewed at 800 x 600 resolution - Updated: November 20, 2002